When replacing your factory radio with an after-market car stereo, a wire harness is a must for a quick installation. It eliminates cutting your OE radio plug helping to maintain your cars value. After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo. Without a wiring harness you will have to cut the factory harness and then test each wire to connect to your radio. In addition, because you do not have to cut your OE radio plug off, using an wiring harness allows you to reinstall your factory receiver at a later time.
We have put this kit together with all of the parts needed for your installation. If you are doing the installation yourself the only thing you will need are common tools to take your dash apart and a good pair of crimpers to crimp the wire harnesses together with the included crimp caps. We do recommend that on some cars if you are installing this yourself that you use a set of dash removal tools that are made to remove your dash without scratching or damaging it. Includes everything needed for installation.
Wire harness connects the aftermarket stereo harness to the vehicles factory harness. Designed specifically to fit the compatible vehicles. Wire harness will plug into the factory without cutting any wires. Standard color coded wires provide a consistent and simplified installation.
Made from OEM quality materials. Does not work with premium factory sound systems. Pioneer MVH-X380BT in dash digital media receiver.
Does NOT play CD's. IPhone, iPod, and Android ready.
10-step illumination dimmer control, and illumination timer. Peak: 50 watts x 4 channels. RMS: 14 watts x 4 channels. Hands free Bluetooth audio streaming. Stream, skip and rate tracks straight from the head unit.Works with most Bluetooth enabled cell phones and tablets. Includes a external wired microphone for clear, convenient talking.
Made for and works with iPod and iPhone and Android devices. Siri Eyes-Free-Mode for iPhone allows you to use voice commands.
Built-in iPod control; 2-way iPod/iPhone control. Control Pandora and iHeart Radio from select smartphones. Play Back and Audio Features. Plays audio from USB storage devices & smartphones. Does NOT have a CD player.Low and high pass filters. 1 Set of 2.5V preamp outputs (front, rear, or subwoofer). 3.5mm Front Auxiliary Input. Stereo is steering wheel control ready.
2006 - 2010 PT Cruiser. 2006 - 2008 Ram 1500. 2006 - 2010 Ram 2500 / 3500. 2005 - 2007 Grand Cherokee. B ecause the factory wiring harness does not have a switched 12V power wire (EIA Color: Red) You will need to run a wire from the fuse box inside your car and connect directly to the aftermarket radio.This wire will be included with a fuse tap to make installation as easy as possible, we also sell a interface that can create this from the factory wiring though. The harness in this kit will not work if the vehicle is equipped with a premium factory sound system. The factory radio, doors, or speakers will be branded as such ie. Boston Acoustics, Infinity, Alpine, etc. This dash kit will not fit vehicles if equipped with factory navigation. Our warehouse is full of Accessories, Amps, In Dash Receivers, Speakers, and Sub. This item ships via UPS. The item should be unopened in the same condition they were received.
We strive for 5 star feedback. If you feel we did not meet this please send us a message so that we can work with you to resolve the issue.The item "PIONEER BLUETOOTH & SMARTPHONE INTG CAR STEREO RADIO With INSTALL KIT & USB/AUX" is in sale since Friday, October 16, 2015. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts". The seller is "carampsonline" and is located in Salt Lake City, Utah. This item can be shipped worldwide.